Ignitech TCIP4 V88... UPGRADED TO V96 during next "Eifel-Treffen"

Hello ignited Sachs-bikers

During next meeting… "Clouseau Racing de France" in association with "Sachs Service aus Mechernich" can upgrade your iGNITECH TCIP4 V88 to V96

- 15 points inserted in the curve or in the 3D MAP

- Two curves or two maps by switching…

No money!

And you will see the absolute cafe racer... with quickgearshift and gearshift light…

Greetings from Toulouse

More details...

i feel the same sensations with the same parts from Ignitech... programmed for my bike… by "Clouseau racing"...…………….

.

Greetings from Toulouse

Pierre

Ja!....Ich habe gesehen…

aber...

...ein Sachs Roadster ist nicht ein Yamaha V max …

..

.

ein Sachs roadster ist immer besser……………

An answer to „der_flo“

You can do it yourself.

You go to the Ignitech website

You download the "V96 uploader"

You save your actual keying v88 in your computer

You upgrade the box with the uploader.

You download the last TCIP4_V96 software

You open it and you open your saved v88 file. the software says "old version". you answer "no problem"

Now your old v88 keying is in the box.

Clic on "Program" and save your new v96 file in your computer.

Now you can use two charts with a switch. You can program a quickshifter by step of 5ms (10 ms for the V88)

You can program a blinking zone with a shiftlighter.Annotation 2019-05-03 131628.jpgAnnotation 2019-05-03 131329.jpgAnnotation 2019-05-03 131303.jpgAnnotation 2019-05-03 130519.jpgAnnotation 2019-05-03 130305.jpg

ACHTUNG!

You can just upgrade a V88 to V96. You cannot do it from a V75 or a V80.

You need a good USB/Serial converter... Many troubles with low-cost products from China.

in any case, you can send me a message…. if you encounter any problem…

And when all is done… send me your *.ign file

So, after that, I will return an actualised V96 file…

Greetings from Toulouse

Pierre

Hi Lothar

I will be back!

Greetings from Toulouse

Pierre